Lab Coater is the optimum combination of dryer and laboratory coating table. Various kinds of material samples are coated in the same run by the coating device and heat-treated in the dryer.
The coating is applied either by a floating, roller or rubber blanket knife. Multiple coatings which do not require reloading are also possible.
- Coating area 300 x 400mm
- Coating thickness 0 ~ 5mm,
- Resolution ratio 0.01mm
- Electic coating, coating speed 0 ~ 4m/min
- Removable pin frame, the pin frame can be put into the oven / dryer (TD610) with the textile when coated
|840 x 680 x 500 mm (L x W x H)